(notice) ?n the absence of confirmation by device specification sheets, sharp takes no responsibility for any defects that may occur in equipment using any sharp devices shown in catalogs, data books, etc. contact sharp in order to obtain the latest device specification sheets before using any sharp device. ?pecifications are subject to change without notice for improvement. (internet) ?ata for sharp's optoelectronic/power devices is provided on internet. (address http://www.sharp.co.jp/ecg/) features applications absolute maximum ratings outline dimensions linear encoder for reading linear scale high sensing accuracy thanks to moire stripe (1) (2) (1) printers opic photointerrupter with encoder function GP1A36RA/gp1a36rb 12 11.3 8.5 2.0 4.4 3.7 8.8 12.0 6.4 4-r2.6 20.2 6.8 5.1 5 gnd 1 2 3 4 5 6 2- 1.6 6 0.8 2.0 4 v ob v cc 0.15 2.5 1.4 4-r1.4 15.0 0.15 8.0 min. 10.0 min . 7.3 +0.15 -0.1 1 anode 2 cathode v oa 3.9 (1.27) (2.45) (6.65) (2.54) (1.335) 3-(1.27) internal connection 10k ? 10k ? pd1 pd3 pd2 pd4 mask for moire stripe amp. 3 1 2 3 4 5 6 6 tolerance : 0.3 mm : opic (optical ic) is a trademark of the sharp corporation. an opic consists of a light-detecting element and signal- processing circuit integrated onto a single chip. *opic photointerrupter (ta=25?c) i f 65 ma i fm 1a v r 6v p 100 mw v cc 7v i ol 8ma p o 250 mw t opr ?c t stg ?c t sol 260 ?c parameter symbol rating unit input output *1 *2 0 to + 70 -40 to +80 forward current peak forward current reverse voltage power dissipation supply voltage low level output current power dissipation operating temperature storage temperature soldering temperature *1 pulse width 100 s, duty retio = 0.01 *2 for 5 s ( ) : reference dimensions .com .com .com .com 4 .com u datasheet
(ta=25 ? c) v f i f = 30 ma - 1.2 1.5 v i r v r = 3 v - - -10 a v cc 4.5 5.0 5.5 v v ol - 0.1 0.4 v oh 4.0 4.9 - parameter symbol conditions min. typ. max. unit forward voltage reverse current low level output voltage t r - 1.0 2.0 s t f - 1.0 2.0 response time m a i cc -20 5 30 50 70 % 50 90 130 duty ratio phase difference d a ? d b input output high level output voltage supply current operating supply voltage response frequency f max - - 7 khz f=70 hz, z= 0.3 mm 0.2 mm 0.2 mm z=0.3 mm 0.2 mm * 1 * 1 * 1 g p 1 a 3 6 r b : f = 1 0 0 h z ( **2 ) ( **1 ) linear scale( **1 ) x a * * 1 g p 1 a 3 6 r a : 9 0 d p i g p 1 a 3 6 r b : 1 5 0 d p i * * 2 g p 1 a 3 6 r a : 7 . 1 ? g p 1 a 3 6 r b : 4 . 2 8 ? ab1 transfer characteristics electro-optical characteristics 70 0 25 50 75 100 60 50 40 30 20 10 0 70 0 50 100 150 200 250 300 100 75 50 25 0 70 80 90 100 65 fig.1 forward current vs. fig.2 output power dissipation vs. forward current i f ( m a) ambient temperature ta ( ? c ) ambient temperature ta ( ? c ) output power dissipation p o ( m w) ambient temperature ambient temperature i ol = 8 ma, i f = 30 ma, v cc = 5 v v cc = 5 v, i f = 30 ma v cc = 5 v, i f = 30 ma i f = 30 ma, v cc = 5v f=70 hz, z= 0.3 mm i f = 30 ma, v cc = 5 v i f = 30 ma, v cc = 5 v .com .com .com .com .com 4 .com u datasheet
115 application circuits notice l the circuit application examples in this publication are provided to explain representative applications of sharp devices and are not intended to guarantee any circuit design or license any intellectual property rights. sharp takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of sharp's devices. l contact sharp in order to obtain the latest device specification sheets before using any sharp device. sharp reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. manufacturing locations are also subject to change without notice. l observe the following points when using any devices in this publication. sharp takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) the devices in this publication are designed for use in general electronic equipment designs such as: --- personal computers --- office automation equipment --- telecommunication equipment [terminal] --- test and measurement equipment --- industrial control --- audio visual equipment --- consumer electronics (ii)measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when sharp devices are used for or in connection with equipment that requires higher reliability such as: --- transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- traffic signals --- gas leakage sensor breakers --- alarm equipment --- various safety devices, etc. (iii)sharp devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- space applications --- telecommunication equipment [trunk lines] --- nuclear power control equipment --- medical and other life support equipment (e.g., scuba). l contact a sharp representative in advance when intending to use sharp devices for any "specific" applications other than those recommended by sharp or when it is unclear which category mentioned above controls the intended use. l if the sharp devices listed in this publication fall within the scope of strategic products described in the foreign exchange and foreign trade control law of japan, it is necessary to obtain approval to export such sharp devices. l this publication is the proprietary product of sharp and is copyrighted, with all rights reserved. under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. express written permission is also required before any use of this publication may be made by a third party. l contact and consult with a sharp representative if there are any questions about the contents of this publication. .com .com .com .com 4 .com u datasheet
|
